V2 Vector Network Analyzer Digital Nano VNA Tester MF HF VHF UHF USB Logic Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio(4.2 inch V2)

Features:4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes.Designed with USB power output interface, which can support 5V/1A power output.Using 2A high current recharging IC, the recharging time is shorter.Supporting host computer software, the host computer supports Chinese and English interfaces.The screen images of the device can be obtained by taking a screenshot of the host computer.Function: can measure S parameters, voltage standing waves ratio, Smith chart, phase, group delay, etc.Specifications:Material: aluminum alloy(case)Main color: blackBattery: 1 * lithium battery, 5000mAh<;0.5ppmNumber of calibration points: 101 pointsNumber of scanning points: 101 pointsNumber of traces: 4Number of mark points: 4 (the mark point bar can be moved up and down on the screen)USB interface: USB Type-C communication mode: CDC (serial)Setting save: 5 groups (after saving, it can be directly recalled when it is used again, no need to recalibrate, and the saved parameters before the last shutdown will be automatically recalled when it is turned on again)Support calibration result interpolation, can measure without recalibration after adjusting the measurement frequency bandItem size: 140 * 73 * 20mm / 5.5 * 2.9 * 0.8inItem weight: 270g / 9.5ouncePacking size: 250 * 150 * 50mm / 9.8 * 5.9 * 2.0inPacking weight: 500g / 1.1lbPacking List:1 * Host1 * SMA Open Calibration Kit1 * SMA Short-circuit Calibration Kit1 * SMA 50 Load Calibration Kit1 * SMA-KK Double-Head Female Hole Adapter1 * SMA-JJ Double-Head Male Pin Adapter1 * SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter2 * 200mm SMA-JJ RG405 RF Cable1 * USB Type-C Data Cable1 * Stylus

• All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy.
• The radio frequency interface is SMA, which is convenient for connecting various tested parts.
• Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.
• Support Chinese and English interface.
• Optimized UI design, convenient for users to perform measurement operations.
• Support screen brightness adjustment.
• The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable.
• Standard fine quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy.
• Welcome and I wish you a happy life, my friend.